Ako si vybrať najlepší E-Liquid zmesi pre tanky a Rebuildable zariadení

e juice blends

Dnes budem pokryť čo verím, sú najlepšie možnosti pre konkrétny e-kvapalina zmesí a aké typy rozprašovača čo najlepšie využitie týchto zmesí.

Zo všetkých mojich skúseností, sací materiál používaný vo vašich jednorazových rozprašovačov, vaše metóda presakovaniu a typ knôtu vo vašich rebuildable zariadeniach bude najväčším faktorom v tom, čo e-kvapalina zmesou, ktorú budete chcieť zamerať na použitie. Airflow bude tiež prísť do hry.  You’ll first want to gauge what your preference is for throat hit, Výroba pary, Prúd vzduchu, a chuť.  Then put together your ideal setup(s) na splnenie tohto preferenciu.

 

Most Common E-liquid Blends

Max VG

max VG

Max VG (Rastlinný glycerín) sú zmesi, kde bude mixer použitie ako veľa VG, ako ľudsky možné.  You can get flavoring suspended in VG but this isn’t very common as VG in comparison to PG isn’t very efficient for carrying or blending flavoring.

A Max VG zmes bude skvelé pre hladké VAPE, veľmi málo krku hit (vysoký % nič sa pridať do krku hit), a tony výroby par.  Most cloud chasers, ak nie všetky, VAPE max VG s 0mg NIC, aby mohli získať čo najviac páry s najmenším množstvom hrdla hitu. Obchod off je menšia celkovo chuť z nedostatku PG, ktoré cloud švov nie sú presne starosti.  So if you were to vape a 50/50 zmes potom si Max VG zmes v tom istom zariadení na rovnakom príkonu, si všimnete, viac chuti kombinuje na 50/50 miešať, ale tiež hit silnejšie hrdlo.  One thing to note is that heat promotes flavor. Môžete sa vydať veľa chuti z Max VG zmesi tým, upping moc umožňujú kvapaliny viac tepla zo svojich cievok.  Knowing this, Žiadny Max VG zmes bude žiariť v zariadení, ktoré zvládnu veľké množstvo energie a umožňuje dostatočné prúdenie vzduchu, aby to pred prehriatím a / alebo pálenie.  Good quality RDA’s and RBA’s that have larger liquid channels to accommodate thicker liquids are ideal for Max VG blends. Len slovo poradenstvo, ak ste práve začínate vaping je vždy najlepšie začať s firmou, ktorá má e vzorky šťavy alebo sampler súpravy tak, že môžete nielen získať chuť na niekoľko ich štiav, ale rovnako tak môžete tiež vidieť, ako sa vaše rebuildable prístroj reaguje na e šťavy, ktoré sa líšia v farbe, hrúbka, a sladkosť.

 

70% VG 30% PG

70 30 PG VG

To je všade okolo skvelý zmes pre mnoho aplikácií.  It will contain 70% objem, ako VG a 30% objem, ako PG. To dáva flexibilitu mixer v ich zmesi pri miešaní.  It will still have that signature smooth, svetlo hrdlo hit, ktorý nájdete vo väčšine Max VG zmesou, ale má oveľa väčšiu PG, čo kvapalné riedidlo a podporuje viac chuti.  This blend will work great in RDA’s, väčšina RBA pánske, a je go-splynúť všetkých nových čiastkových Tanks biť na trhu.  You can also get away with using this blend in some clearomizers.  But I wouldn’t suggest it, lepšie ísť s ďalšie zmesou podľa môjho názoru.

 

50% VG 50% PG

To je ísť na e-tekuté štartovacie zmesi pre všetkých tých ľudí, ktorí chcú spustiť vaping and who are picking up their first ‘dipping a toe in the watereGo kit.  A 50/50 Zmes bude fungovať ako sen vo viacerých základných clearomizers s jednorazovými hlavami cievok.  If you’re the type of person that would rather go all out with a high power device and a nice tank this blend will still be fine, ale povedala by som, že tiež snaží o 70VG / 30PG vidieť, čo sa vám páči viac.  This blend in an RDA, bude fungovať, ale očakávať, že niektorí vypľuť späť, ak ste náhodou cez kvapkanie.

Tenší kvapalina má tendenciu nie "palicu’ k cievkam toľko, spôsobujúce niektoré odprýskávání a pľuvať späť na vyššiu Watter / napätia.  Also some serious throat hit at higher wattage.  In some cases with RBA tanks the liquid might be too thin, causing some leaking. This can also be cause by too little airflow or too little wicking material, see below where I discusses this potential issues. Thicker and/or sweeter e-liquid in a device that isn’t meant for it may turn your cievka čierna.

 

Vysoká PG

throat hit

Poznám pár ľudí, ktorí sa chceli Vape vysokej PG zmesi.  60% PG / 40% VG alebo aj viac na strane PG, pretože hitu hrdla.  The more PG the bigger (či drsnejšie) hitom hrdlo. Majú radi, že cigareta emulovať horieť.  PG does promote flavor but only to an extent.  I personally couldn’t tell the difference from a 50/50 rozmiešať do 60/40 alebo dokonca 70/30 high PG chuť múdry.  Throat hit on the other hand, môže cítiť rozdiel.  Unless you have a tank system that needs very thin liquid or really, naozaj, naozaj rád vážne hit v krku, by mohlo byť lepšie, s 50/50 or higher on the side of VG. Again, preference is what matters here. I’m sure some cartomizer applications would be greatly suited for high PG blends.

 

Destilovaná voda zmesi

Ak máte PG alebo VG alergiu to bude skvelá voľba pre vás.  Getting a VG/Distilled Water blend you are going to suffer a flavor and mild throat hit loss.  On the bright side and most importantly, nebudete trpieť vašej alergie.  Most flavor makers offer their flavors suspended in Distilled Water.

PG / destilovaná voda zmesi sú mimoriadne brutálny na krku.  They offer great flavor, ale veľmi málo produkcie pary s jadrovým krku hit.  If I had a VG allergy I would 100% použite túto zmes len zostať mimo cigarety.  Just keep the wattage/voltage low with high resistance atomizers and good airflow. It can be tolerated.

 

Presakovanie

wicking

Pre vás Rebuilders vonku, what type of material used for your wick can dictate the blend you use. Using Silica or similar materials will have naturally slow capillary action. Thinner liquids will be better suited so you can optimize this action and get liquid to the coils at a steady rate and minimize dry hits. Sure it’s possible to drip a Max VG blend directly onto the coils, but don’t expect the silica or eco wool to absorb liquid from the deck and bring it to the coils or draw liquid out of a tank in a timely fashion.

Using Ball Cotton and the many Cotton Pad variants have great capillary action. Ball Cotton has slightly less capillary action than the Japanese Pad types because the tiny fibers in Ball Cotton all run parallel to each other while the Pad variants do. There is also Rayon, syntetický, silky material which has better capillary action then Ball Cotton but not quite as good as the Pad types. I used Rayon for quite some time with great success. It has great flavor right out of the gate, whereas Ball Cotton usually has a break-in period when it can taste a little earthy. After trying Pad type cotton, such as Koh Gen Do or Muji cotton, I haven’t looked back. I don’t taste the break-in period that I do with Ball Cotton and I get better wicking action than I do with Rayon. Koh Gen Do is a great all around wicking material that is capable of being used in most, ak nie všetky, applications. If anyone wants to try Rayon, Mám 5LB box (celkom veľa životnosť dodávka) ktorým sa v okolí, by radostne odrezať 100 ft alebo tak to za vás. Len zanechať komentár nižšie, a ja sa vrátim k vám.

 

Prúd vzduchu

Airflow Uskutočnenie presakovanie je až vo chvíli aplikovať v nádržiach, ktoré využívajú vákuum, and the airflow will effect the flavoring and heat. Less airflow, Čím teplejšie veci dostane, which will produce more flavor. Finding a good balance that works for you is what you should be after. Airflow effecting wicking is a fine balance you need to practice and experiment with.

Napríklad (s Spodný Coil Clearomizers a RBAs rovnako, ako Kayfun alebo Goblin), lets say I like to mouth to lung inhale my vape. This would require fairly closed off airflow. Since my airflow is closed down when I take a draw I’m going be applying negative pressure inside the tank, s vákuom vnútri nádrže (bublina nad hladinou kvapaliny vo vnútri nádrže) is going to want to draw more e-liquid in. So if I don’t have enough wicking material I’ll draw in too much liquid and flood my coils. If I have too much wicking material it will blow the flow, bez ohľadu na to, ako tvrdo som kresliť, causing dry hits. The more you open the airflow the less negative pressure you’ll apply so you’ll have to learn to balance your wicking material. The more airflow you have, čím menej materiálu, budete chcieť použiť pre efektívny odvod, but the less airflow you have the more material you’ll want to use to keep from flooding. It’s a fine balancing act.

To sa nevzťahuje na RDA je, pretože neexistuje nádrž alebo podtlak sa obávať, tak neváhajte napchať maximálne množstvo materiálu, ako môžete v týchto zvitkoch (pravidlom je, nie je tak moc, že ​​cievka(s) sa posunie okolo, zatiaľ čo sa snažia vytiahnuť materiálu skrz) a Vape preč.

 

Nič Úroveň E-Liquid zmesi

ejuice strength guide

Deciding how much nicotine to add to your e-liquid is yet another fine balancing act you need to tackle by trial and error. It starts off depending on how much you smoke (ak si nie ste užívateľom tabaku, Dôrazne odporúčame, aby ste zostali ďaleko od nikotínu úplne).  Myself, Bol som balíček denne fajčiarI started with a $35 Kanger EVOD kit with 18mg nicotine Liquid. I realized immediately that it was too strong with how I was vaping. The convenience of my little vaporizer had me wanting to puff on it all day. With cigarettes, Budem musieť zastaviť to, čo som robil, ísť von, smoke and come back in. I didn’t have this issue with my vaporizer, Mohol by som vziať nafúknuť po obláčiku.

My next e-liquid order I stepped down to 12mg and it was a noticeable difference and worked great with my little EVODs. I also did my best to taper my usage and not chain vape myself to a nicotine headache. Then I upgraded to a more powerful vaporizer, 12mg stal sa príliš silný, time to step it down again. You where this is going. From what I gathered over my experiences and talking to many other people that use vaporizers. The balance point seems to be, a pack a day can be curved with around 12mg per ml of e-liquid. Work from there. 2 balenie deň?  Maybe 18mg or stronger. Less then a pack a day?  6-8mg might be a good place to start.

 

Na záver tejto námety príspevok, Poviem to:  Most things are subjective and something I covered here might not work for you. The best advice I’ve ever received is guidelines or common knowledge and the recommendation that I try anything and everything I can until I’ve found what works best for me. So take all suggestions here as just that, a suggestion. This is in no way a be all, end all guide line for the perfect E-liquid blends. Build off the information I’ve gathered over many, mnoho mesiacov pokusov a omylov a nájsť to, čo robí veľkú vaping zážitok pre Vás.

Ako vždy, stay healthy. Until next time

 

Scott
Scott has been an avid vaper for the past three years now. He started smoking when he was 13 years old and had his last cigarette on February 22nd, 2013 vo veku 29 when he received his very first vape starter kit in the mail. That day was a good day, one that he will always remember and he's here to share his journey with you so that hopefully you can have that same great, healthy feeling that Scott has!

7 Comments

  1. ray@moonyar.nl' Ray says:

    Great artice, i learned something, thank you!

  2. bobbystecher@gmail.com' Bobby Stecher says:

    Hey i could really use some of that jo kin do Japanese cotton. I am new to the vaping game and just bought the subox mini kit and i do like it but my .5 coils keep burning out in a few days. Also all the juices i have tried have been very muted. Can you recommend any that have great flavor that will still come out in the subtank mini. I appreciate any insight and as much cotton as u can. That would truly be awesome. Please help me. Thanks

    • Scott says:

      Hey Bobby,

      I’m not entirely sure what you’re asking regarding cotton. Can you be more specific. As far as a good flavor to put in your Subtank Mini, my favorite so far is Strawberry Banana Smoothie from the Style Uno line. Give it a shot, the 60VG/40PG blend is going to come through great.

  3. Faith.praise.glory@gmail.com' Chris says:

    Thanks! This article was very informative. I have been vaping for a while and im trying to learn as much as possible as im getting more into it. I would love to start getting into rba”s. Im totally interested in your offer of fabric 🙂 thanks for sharing!

Nechaj odpoveď

Vaša e-mailová adresa nebude zverejnená. Povinné položky sú označené *