Kòman yo chwazi Pi bon E-likid melanj lan pou Tank ak Aparèy Rebuildable

e juice blends

Today I’ll cover what I believe are the best options for specific e-likid blends and what types of atomizeur fè pou sèvi nan pi bon nan tout sa yo melanje.

Ki sòti nan tout eksperyans mwen, the wicking material used in your disposable atomizeur, your wicking method and type of wick in your rebuildable devices is going to be the biggest factor in what e-liquid blends you’ll want to target for use. Vantilasyon ap tou antre nan jwe.  You’ll first want to gauge what your preference is for throat hit, vapè pwodiksyon, Vantilasyon, ak gou.  Then put together your ideal setup(a) al kontre ki preferans.


Most Common E-liquid Blends

Max VG

max VG

Max VG (Gliserin legim) yo melanje kote mixer a pral sèvi ak kòm anpil VG kòm umenman posib.  You can get flavoring suspended in VG but this isn’t very common as VG in comparison to PG isn’t very efficient for carrying or blending flavoring.

A Max VG blend will be great for a smooth Vape, anpil ti frape gòj (segondè % RÉSEAU pral ajoute nan frape nan gòj), ak tòn vapè pwodiksyon.  Most cloud chasers, si se pa tout, Vape max VG ak 0mg RÉSEAU sa yo ke yo ka jwenn vapè ki pi ak kantite lajan an piti nan frape nan gòj. Komès la koupe se mwens gou jeneral soti nan mank nan PG, ki chasers nwaj yo pa egzakteman enkyete w sou.  So if you were to vape a 50/50 melanj Lè sa a, yon melanj Max VG nan aparèy la menm nan menm puissant nan, ou pral avi plis gou soti nan la 50/50 melanj men tou, yon gòj pi fò frape.  One thing to note is that heat promotes flavor. Ou ka pote soti tòn gou ki sòti nan yon melanj Max VG pa upping pouvwa a bay plis chalè nan likid soti nan anwoulman ou.  Knowing this, yon melanj Max VG ki pral klere nan aparèy ki ka okipe yon anpil nan pouvwa epi li bay bon jan vantilasyon kenbe bagay sa yo soti nan surchof ak / oswa boule.  Good quality RDA’s and RBA’s that have larger liquid channels to accommodate thicker liquids are ideal for Max VG blends. Jis yon mo nan konsèy, if you’re just starting out vaping it’s always best to start with a company that has echantiyon ji e oswa twous Modèl pou ke ou ka pa sèlman jwenn yon gou pou plizyè nan ji yo, men se konsa ou ka tou wè ki jan aparèy rebuildable ou reponn a e ji ki varye nan koulè, epesè, ak dous.


70% VG 30% PG

70 30 PG VG

Sa a se yon tout otou gwo melanj pou anpil aplikasyon pou.  It will contain 70% volim kòm VG ak 30% volim kòm PG. Li bay fleksibilite nan mixer nan melanj yo lè melanje.  It will still have that signature smooth, gòj limyè frape ke ou ap jwenn nan pifò Max VG melanje, men tou li pote plis PG, sa ki fè mens nan likid epi li fè pwomosyon plis gou.  This blend will work great in RDA’s, pi RBA a, e li se yon ale-a melanj pou tout nouvo tank yo Sub frape mache a.  You can also get away with using this blend in some clearomizers.  But I wouldn’t suggest it, pi byen ale ak melanj nan pwochen te nan opinyon mwen.


50% VG 50% PG

Sa a se yon ale nan e-likid starter melanj pou tout moun sa yo je l 'nan start vaping and who are picking up their first ‘dipping a toe in the watertwous eAle.  Yon 50/50 blend will work like a dream in the more basic clearomizers with disposable coil heads.  If you’re the type of person that would rather go all out with a high power device and a nice tank this blend will still be fine, men mwen ta sijere tou ap yon 70VG / 30PG yo wè sa ki ou renmen plis.  This blend in an RDA, pral travay men atann kèk krache tounen si ou aksidantèlman sou degoute.

Mens likid gen tandans fè pa 'bwa’ anwoulman yo tèlman, sa ki lakòz kèk eklate ak krache tounen nan pi wo watter / vòltaj.  Also some serious throat hit at higher wattage.  In some cases with RBA tanks the liquid might be too thin, causing some leakingThis can also be cause by too little airflow or too little wicking material, see below where I discusses this potential issues. Thicker and/or sweeter e-liquid in a device that isn’t meant for it may turn your bobin nwa.


Segondè PG

throat hit

Mwen konnen yon moun ki koup ki renmen vape segondè melanje PG.  60% PG / 40% VG oswa menm plis sou bò PG paske yo te frape nan gòj.  The more PG the bigger (oswa di ankò) frape nan gòj. Yo renmen sa emulan sigarèt boule.  PG does promote flavor but only to an extent.  I personally couldn’t tell the difference from a 50/50 melanj nan yon 60/40 oswa menm 70/30 segondè PG gou ki gen bon konprann.  Throat hit on the other hand, ka santi diferans ki genyen.  Unless you have a tank system that needs very thin liquid or really, reyèlman, vrèman renmen yon frape nan gòj grav, ta ka ap sèvi pi bon ak yon 50/50 or higher on the side of VG. Again, preference is what matters here. I’m sure some cartomizer applications would be greatly suited for high PG blends.


Distile melanje dlo

Si ou gen yon PG oswa VG alèji sa a pral yon opsyon ki gwo pou ou.  Getting a VG/Distilled Water blend you are going to suffer a flavor and mild throat hit loss.  On the bright side and most importantly, ou pa pral soufri nan alèji ou.  Most flavor makers offer their flavors suspended in Distilled Water.

PG / distile melanje dlo yo ekstrèman brital sou gòj la.  They offer great flavor, men anpil ti vapè pwodiksyon ak yon gòj nikleyè frape.  If I had a VG allergy I would 100% itilize melanj sa a jis yo rete nan sigarèt.  Just keep the wattage/voltage low with high resistance atomizers and good airflow. It can be tolerated.




Pou ou rebuilders yo deyò, what type of material used for your wick can dictate the blend you use. Using Silica or similar materials will have naturally slow capillary action. Thinner liquids will be better suited so you can optimize this action and get liquid to the coils at a steady rate and minimize dry hits. Sure it’s possible to drip a Max VG blend directly onto the coils, but don’t expect the silica or eco wool to absorb liquid from the deck and bring it to the coils or draw liquid out of a tank in a timely fashion.

Using Ball Cotton and the many Cotton Pad variants have great capillary action. Ball Cotton has slightly less capillary action than the Japanese Pad types because the tiny fibers in Ball Cotton all run parallel to each other while the Pad variants do. There is also Rayon, yon sentetik, silky material which has better capillary action then Ball Cotton but not quite as good as the Pad types. I used Rayon for quite some time with great success. It has great flavor right out of the gate, whereas Ball Cotton usually has a break-in period when it can taste a little earthy. After trying Pad type cotton, such as Koh Gen Do or Muji cotton, I haven’t looked back. I don’t taste the break-in period that I do with Ball Cotton and I get better wicking action than I do with Rayon. Koh Gen Do is a great all around wicking material that is capable of being used in most, si se pa tout, applications. If anyone wants to try Rayon, Mwen gen yon ti bwat 5lb (bèl anpil yon rezèv pou tan lavi) tap mete alantou, ta byen renmen plen koupe 100ft oswa konsa nan li pou ou. Jis kite yon kòmantè anba a epi mwen pral jwenn tounen ba ou.



Vantilasyon efèktuan mèch se sèlman pral pou aplike pou nan tank ki itilize yon vakyòm, and the airflow will effect the flavoring and heat. Less airflow, bagay sa yo cho vin, which will produce more flavor. Finding a good balance that works for you is what you should be after. Airflow effecting wicking is a fine balance you need to practice and experiment with.

Yon egzanp (ak Anba Bobine Clearomizers ak RBAs like a Kayfun or Goblin), lets say I like to mouth to lung inhale my vape. This would require fairly closed off airflow. Since my airflow is closed down when I take a draw I’m going be applying negative pressure inside the tank, ak vakyòm a andedan tank la (ti wonn nan pi wo a likid la andedan tank la) is going to want to draw more e-liquid in. So if I don’t have enough wicking material I’ll draw in too much liquid and flood my coils. If I have too much wicking material it will blow the flow, pa gen pwoblèm kòman li di pou mwen trase, causing dry hits. The more you open the airflow the less negative pressure you’ll apply so you’ll have to learn to balance your wicking material. The more airflow you have, materyèl la mwens ou pral vle pou itilize pou mèch efikas, but the less airflow you have the more material you’ll want to use to keep from floodingIt’s a fine balancing act.

Sa a pa aplike nan RDA la, kòm pa gen okenn tank oswa vakyòm enkyete sou, se konsa santi yo lib yo bagay kantite lajan maksimòm nan materyèl ke ou kapab nan sa yo anwoulman (règ nan gwo pous se pa tèlman bagay ke bobin an(a) ap chanjman alantou pandan y ap eseye rale materyèl ou nan) ak vape lwen.


Nic Nivo E-likid melanj

ejuice strength guide

Deciding how much nikotin to add to your e-liquid is yet another fine balancing act you need to tackle by trial and error. It starts off depending on how much you lafimen (si ou pa yon itilizatè tabak, Mwen fòtman sijere ou rete lwen tout ansanm nikotin).  Myself, Mwen te yon pake yon fimè jouI started with a $35 Kanger EVOD kit with 18mg nicotine Liquid. I realized immediately that it was too strong with how I was vaping. The convenience of my little vaporizer had me wanting to puff on it all day. With cigarettes, Mwen ta gen yo sispann sa m 'te fè, ale deyò, smoke and come back in. I didn’t have this issue with my vaporizer, Mwen te kapab pran soufle soufle apre.

My next e-liquid order I stepped down to 12mg and it was a noticeable difference and worked great with my little EVODs. I also did my best to taper my usage and not chain vape myself to a nicotine headache. Then I upgraded to a more powerful vaporizer, 12mg te vin twò fò, time to step it down again. You where this is going. From what I gathered over my experiences and talking to many other people that use vaporizers. The balance point seems to be, a pack a day can be curved with around 12mg per ml of e-liquid. Work from there. 2 pake yon jou?  Maybe 18mg or stronger. Less then a pack a day?  6-8mg might be a good place to start.


Pou nou fini sa a post sijesyon, Mwen pral di sa a:  Most things are subjective and something I covered here might not work for you. The best advice I’ve ever received is guidelines or common knowledge and the recommendation that I try anything and everything I can until I’ve found what works best for me. So take all suggestions here as just that, a suggestion. This is in no way a be all, end all guide line for the perfect E-liquid blends. Build off the information I’ve gathered over many, plizyè mwa nan esè ak erè epi jwenn sa ki fè yon eksperyans vaping gwo pou ou.

Kòm toujou, stay healthy. Until next time


Scott has been an avid vaper for the past three years now. He started smoking when he was 13 years old and had his last cigarette on February 22nd, 2013 a laj de 29 when he received his very first vape starter kit in the mail. That day was a good day, one that he will always remember and he's here to share his journey with you so that hopefully you can have that same great, healthy feeling that Scott has!

8 Kòmantè

  1. wonderful points altogether, you simply won a new reader.
    What could you recommend about your publish that you juust made some days ago?
    Any positive?

  2. Faith.praise.glory@gmail.com' Chris di:

    Thanks! This article was very informative. I have been vaping for a while and im trying to learn as much as possible as im getting more into it. I would love to start getting into rba”a. Im totally interested in your offer of fabric 🙂 thanks for sharing!

  3. bobbystecher@gmail.com' Bobby Stecher di:

    Hey i could really use some of that jo kin do Japanese cotton. I am new to the vaping game and just bought the subox mini kit and i do like it but my .5 coils keep burning out in a few days. Also all the juices i have tried have been very muted. Can you recommend any that have great flavor that will still come out in the subtank mini. I appreciate any insight and as much cotton as u can. That would truly be awesome. Please help me. Thanks

    • Scott di:

      Hey Bobby,

      I’m not entirely sure what you’re asking regarding cotton. Can you be more specific. As far as a good flavor to put in your Subtank Mini, my favorite so far is Strawberry Banana Smoothie from the Style Uno line. Give it a shot, the 60VG/40PG blend is going to come through great.

      • bobbystecher@gmail.com' Bobby Stecher di:

        You said you had a 5lb box of Rayon. I could def use some of that! Anything u can do to help would be awesome. That wasn’t a joke right?

        • Scott di:

          Oh right! Forgot about that, I’ll totally send you some Rayon as long as you’re in the USA. Shoot me an e-mail to tyraxscott at gmail dot com with your name an address.

  4. ray@moonyar.nl' Ray di:

    Great artice, i learned something, thank you!

Kite yon Reply

Adrès imèl ou pa pral dwe pibliye. Jaden obligatwa yo make *