Hvordan at vælge den bedste E-Liquid Blends for Tanks og Rebuildable enheder

e juice blends

I dag vil jeg dække, hvad jeg mener er de bedste muligheder for specifikke e-væske blandinger og hvilke typer forstøvere gøre den bedste brug af disse blandinger.

Fra alle mine erfaringer, vægematerialet bruges i dine engangs forstøvere, din fugtspredende metode og typen af ​​væge i din rebuildable enheder vil være den største faktor i det, e-væske blander du ønsker at målrette til brug. Luftstrøm vil også komme i spil.  You’ll first want to gauge what your preference is for throat hit, damp produktion, Airflow, og smag.  Then put together your ideal setup(s) at opfylde denne præference.

 

Most Common E-liquid Blends

Max VG

max VG

Max VG (Vegetabilsk glycerin) er blandinger, hvor mikseren vil bruge så meget VG som menneskeligt muligt.  You can get flavoring suspended in VG but this isn’t very common as VG in comparison to PG isn’t very efficient for carrying or blending flavoring.

En Max VG blanding vil være stor for en glat vape, meget lidt i halsen hit (høj % nic vil føje til halsen hit), og tonsvis af damp produktion.  Most cloud chasers, hvis ikke alle, vape max VG med 0mg nic, så de kan få mest damp med det mindste beløb af halsen hit. Den afvejning er mindre samlede smag fra manglen på PG, som cloud chasers ikke ligefrem bekymrede.  So if you were to vape a 50/50 blend derefter en Max VG blanding i den samme enhed på samme watt, du vil opdage mere smag fra 50/50 blend men også en stærkere hals hit.  One thing to note is that heat promotes flavor. Du kan bringe ud tonsvis af smag fra en Max VG blanding ved upping magt giver væsken mere varme fra dine spoler.  Knowing this, en Max VG blanding kommer til at skinne i enheder, der kan håndtere en masse magt og giver tilstrækkelig luftgennemstrømning til at holde tingene fra overophedning og / eller brændende.  Good quality RDA’s and RBA’s that have larger liquid channels to accommodate thicker liquids are ideal for Max VG blends. Lige et ord af rådgivning, hvis du lige er startet ud vaping det er altid bedst at starte med en virksomhed, der har e juice prøver eller sampler kits, så du kan ikke kun få en smag for flere af deres safter, men så kan du også se, hvordan din rebuildable enhed reagerer på e juice, der varierer i farve, tykkelse, og sødme.

 

70% VG 30% PG

70 30 PG VG

Dette er en alle omkring store blanding til mange applikationer.  It will contain 70% volumen som VG og 30% volumen som PG. Det giver blanderen fleksibilitet i deres blanding ved blanding.  It will still have that signature smooth, lys halsen hit, som du finder i de fleste Max VG blandinger, men det også bærer mere PG, hvilket gør væsken tyndere og fremmer mere smag.  This blend will work great in RDA’s, fleste RBA s, og er en go-to blande for alle de nye Sub Tanks rammer markedet.  You can also get away with using this blend in some clearomizers.  But I wouldn’t suggest it, hellere vil med den næste blanding efter min mening.

 

50% VG 50% PG

Dette er en go til e-væske starteren blanding for alle de mennesker, der ønsker at begynde vaping and who are picking up their first ‘dipping a toe in the watereGo-kit.  A 50/50 blanding vil arbejde som en drøm i de mere basale clearomizers med engangs coil hoveder.  If you’re the type of person that would rather go all out with a high power device and a nice tank this blend will still be fine, men jeg vil foreslå forsøger også en 70VG / 30PG at se, hvad du kan lide mere.  This blend in an RDA, vil arbejde, men forventer nogle spytte tilbage, hvis du ved et uheld i løbet af drop.

Tyndere væske tendens til ikke "stick’ til spolerne så meget, forårsager nogle popping og spytte tilbage på højere watter / spænding.  Also some serious throat hit at higher wattage.  In some cases with RBA tanks the liquid might be too thin, causing some leaking. This can also be cause by too little airflow or too little wicking material, see below where I discusses this potential issues. Thicker and/or sweeter e-liquid in a device that isn’t meant for it may turn your spole sort.

 

High PG

throat hit

Jeg kender et par folk, der kan lide at vape høje PG blandinger.  60% PG / 40% VG eller endnu mere på PG side på grund af halsen hit.  The more PG the bigger (eller hårdere) halsen hit. De kan lide at cigaret emulerer brænde.  PG does promote flavor but only to an extent.  I personally couldn’t tell the difference from a 50/50 blend til en 60/40 eller endda 70/30 høj PG smag klogt.  Throat hit on the other hand, kan mærke forskellen.  Unless you have a tank system that needs very thin liquid or really, virkelig, virkelig som en seriøs hals hit, måske være bedre tjent med en 50/50 or higher on the side of VG. Again, preference is what matters here. I’m sure some cartomizer applications would be greatly suited for high PG blends.

 

Destilleret vand blandinger

Hvis du har en PG eller VG allergi vil dette være en stor mulighed for dig.  Getting a VG/Distilled Water blend you are going to suffer a flavor and mild throat hit loss.  On the bright side and most importantly, du vil ikke blive ramt af din allergi.  Most flavor makers offer their flavors suspended in Distilled Water.

PG / destilleret vand blandinger er yderst brutale på halsen.  They offer great flavor, men meget lidt produktion damp med en nuklear hals hit.  If I had a VG allergy I would 100% bruge denne blanding blot at bo off cigaretter.  Just keep the wattage/voltage low with high resistance atomizers and good airflow. It can be tolerated.

 

Fugtspredende

wicking

For dig Rebuilders derude, what type of material used for your wick can dictate the blend you use. Using Silica or similar materials will have naturally slow capillary action. Thinner liquids will be better suited so you can optimize this action and get liquid to the coils at a steady rate and minimize dry hits. Sure it’s possible to drip a Max VG blend directly onto the coils, but don’t expect the silica or eco wool to absorb liquid from the deck and bring it to the coils or draw liquid out of a tank in a timely fashion.

Using Ball Cotton and the many Cotton Pad variants have great capillary action. Ball Cotton has slightly less capillary action than the Japanese Pad types because the tiny fibers in Ball Cotton all run parallel to each other while the Pad variants do. There is also Rayon, en syntetisk, silky material which has better capillary action then Ball Cotton but not quite as good as the Pad types. I used Rayon for quite some time with great success. It has great flavor right out of the gate, whereas Ball Cotton usually has a break-in period when it can taste a little earthy. After trying Pad type cotton, such as Koh Gen Do or Muji cotton, I haven’t looked back. I don’t taste the break-in period that I do with Ball Cotton and I get better wicking action than I do with Rayon. Koh Gen Do is a great all around wicking material that is capable of being used in most, hvis ikke alle, applications. If anyone wants to try Rayon, Jeg har en 5 £ kasse (temmelig meget et liv tid forsyning) om rundt, ville gerne afskære 100ft eller deromkring af det for dig. Bare efterlade en kommentar nedenfor og jeg vil vende tilbage til dig.

 

Airflow

Airflow foretager fugtspredende er kun vil gælde i tanke, der bruger et vakuum, and the airflow will effect the flavoring and heat. Less airflow, de varmere ting får, which will produce more flavor. Finding a good balance that works for you is what you should be after. Airflow effecting wicking is a fine balance you need to practice and experiment with.

Et eksempel (med Bottom Coil Clearomizers og RBAs ligesom en Kayfun eller Goblin), lets say I like to mouth to lung inhale my vape. This would require fairly closed off airflow. Since my airflow is closed down when I take a draw I’m going be applying negative pressure inside the tank, med vakuum i tanken (boblen over væsken i tanken) is going to want to draw more e-liquid in. So if I don’t have enough wicking material I’ll draw in too much liquid and flood my coils. If I have too much wicking material it will blow the flow, ligegyldigt hvor hårdt jeg henlede, causing dry hits. The more you open the airflow the less negative pressure you’ll apply so you’ll have to learn to balance your wicking material. The more airflow you have, den mindre materiale, du ønsker at bruge til effektiv fugtspredende, but the less airflow you have the more material you’ll want to use to keep from flooding. It’s a fine balancing act.

Dette gælder ikke for RDA s, da der ikke er tanken eller vakuum at bekymre sig om, så er du velkommen til at proppe den maksimale mængde materiale som du kan i disse spoler (tommelfingerregel er ikke så meget at spolen(s) vil flytte rundt, mens forsøger at trække dit materiale gennem) og vape væk.

 

Nic Level E-Liquid Blends

ejuice strength guide

Deciding how much nicotine to add to your e-liquid is yet another fine balancing act you need to tackle by trial and error. It starts off depending on how much you smoke (hvis du ikke er en tobak bruger, Jeg anbefaler stærkt at du holde sig væk fra nikotin helt).  Myself, Jeg var en pakke om dagen rygerI started with a $35 Kanger EVOD kit with 18mg nicotine Liquid. I realized immediately that it was too strong with how I was vaping. The convenience of my little vaporizer had me wanting to puff on it all day. With cigarettes, Jeg ville have til at stoppe, hvad jeg gjorde, gå udenfor, smoke and come back in. I didn’t have this issue with my vaporizer, Jeg kunne tage pust efter sug.

My next e-liquid order I stepped down to 12mg and it was a noticeable difference and worked great with my little EVODs. I also did my best to taper my usage and not chain vape myself to a nicotine headache. Then I upgraded to a more powerful vaporizer, 12mg blev for stærk, time to step it down again. You where this is going. From what I gathered over my experiences and talking to many other people that use vaporizers. The balance point seems to be, a pack a day can be curved with around 12mg per ml of e-liquid. Work from there. 2 pakker en dag?  Maybe 18mg or stronger. Less then a pack a day?  6-8mg might be a good place to start.

 

Som afslutning på denne forslag indlæg, Jeg vil sige dette:  Most things are subjective and something I covered here might not work for you. The best advice I’ve ever received is guidelines or common knowledge and the recommendation that I try anything and everything I can until I’ve found what works best for me. So take all suggestions here as just that, a suggestion. This is in no way a be all, end all guide line for the perfect E-liquid blends. Build off the information I’ve gathered over many, mange måneders trial and error, og finde det, der gør en stor vaping oplevelse for dig.

Som altid, stay healthy. Until next time

 

Scott
Scott has been an avid vaper for the past three years now. He started smoking when he was 13 years old and had his last cigarette on February 22nd, 2013 i en alder af 29 when he received his very first vape starter kit in the mail. That day was a good day, one that he will always remember and he's here to share his journey with you so that hopefully you can have that same great, healthy feeling that Scott has!

7 Comments

  1. ray@moonyar.nl' Ray says:

    Great artice, i learned something, thank you!

  2. bobbystecher@gmail.com' Bobby Stecher says:

    Hey i could really use some of that jo kin do Japanese cotton. I am new to the vaping game and just bought the subox mini kit and i do like it but my .5 coils keep burning out in a few days. Also all the juices i have tried have been very muted. Can you recommend any that have great flavor that will still come out in the subtank mini. I appreciate any insight and as much cotton as u can. That would truly be awesome. Please help me. Thanks

    • Scott says:

      Hey Bobby,

      I’m not entirely sure what you’re asking regarding cotton. Can you be more specific. As far as a good flavor to put in your Subtank Mini, my favorite so far is Strawberry Banana Smoothie from the Style Uno line. Give it a shot, the 60VG/40PG blend is going to come through great.

      • bobbystecher@gmail.com' Bobby Stecher says:

        You said you had a 5lb box of Rayon. I could def use some of that! Anything u can do to help would be awesome. That wasn’t a joke right?

        • Scott says:

          Oh right! Forgot about that, I’ll totally send you some Rayon as long as you’re in the USA. Shoot me an e-mail to tyraxscott at gmail dot com with your name an address.

  3. Faith.praise.glory@gmail.com' Chris says:

    Thanks! This article was very informative. I have been vaping for a while and im trying to learn as much as possible as im getting more into it. I would love to start getting into rba”s. Im totally interested in your offer of fabric 🙂 thanks for sharing!

Efterlad et Svar

Din e-mail adresse vil ikke blive offentliggjort. Krævede felter er markeret *